Sony HCD-C450 Operating Instructions - Page 72
LEVEL, To adjust the volume of all the, speakers at one time, TEST TONE, BALANCE
View all Sony HCD-C450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
FRONT Front speaker distance from the 5.0 m/17 ft listening position can be set in 0.2 meters (1.0 ft) increments from 1.0 to 15.0 meters (3.0 to 50.0 ft). CENTER Center speaker distance can be 5.0 m/17 ft moved up to 1.6 meters (5.0 ft) forward closer to the listening position, in 0.2 meters (1.0 ft) increments. REAR 3.4 m/12 ft Rear speaker distance can be moved up to 4.6 meters (15.0 ft) closer to your listening position from the front speaker position, in 0.2 meter (1.0 ft) increments. Notes • In SPEAKER SETUP, the North American model's OSD displays both metric and imperial measurements.The other model display metric measurements only. The manual shows both. • When you set the distance, the sound cuts off for a moment. • If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the rear speakers farther away from your listening position than the front speakers. xBALANCE You can vary the balance of the left and right speakers as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default setting are underlined. FRONT CENTER REAR CENTER Adjust the balance between the front left and right speakers (You can adjust from center 6 step left or right). Adjust the balance between the rear left and right speakers (You can adjust from center 6 step left or right). xLEVEL You can vary the level of each speaker as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default settings are underlined. CENTER 0 dB Adjusts the level of the center speaker (-6 dB to +6 dB, 1 dB increments). REAR 0 dB Adjusts the level of the rear speakers (-6 dB to +6 dB, 1 dB increments). SUBWOOFER Adjusts the level of the 0 dB subwoofer (-6 dB to +6 dB, 1 dB increments). To adjust the volume of all the speakers at one time Use the VOLUME control on the system or press VOL +/-. xTEST TONE The speakers will emit a test tone to adjust "BALANCE" and "LEVEL." The default settings are underlined. OFF ON The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the "SPEAKER SETUP" items, the test tone is emitted from both left and right speakers simultaneously. 72GB