Sony HCD-C700 Operating Instructions - Page 18
Inserting Batteries into the Remote, Step 1: Speaker System Hookup
View all Sony HCD-C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Inserting Batteries into the Remote You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with an old one. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. • If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Step 1: Speaker System Hookup Connect the supplied speaker system using the supplied speaker cords by matching the colours of the terminals to those of the cords. Do not connect any speakers other than those supplied with this system. To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on page 25. Required cords Speaker cords The connector and the colour tube of the speaker cords are the same colour as the label of the terminals to be connected. Grey (+) (+) (-) Colour tube (-) Black 18