Sony HCD-C700 Operating Instructions - Page 69
Settings for the Speakers (SPEAKER SETUP), SPEAKER SETUP
View all Sony HCD-C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
xPAUSE MODE (DVD only) Selects the picture in pause mode. AUTO FRAME The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. The picture, including subjects that do not move dynamically, is output in high resolution. xPARENTAL CONTROL t (DVD only) Sets a password and playback limitation level for DVDs with playback limitation for children. For details, see "Limiting playback for children (Parental Control)" (page 56). xTRACK SELECTION (DVD only) Gives the sound track having the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded. OFF AUTO No priority given. Priority given. Notes • When you set the item to "AUTO," the language may change. The "TRACK SELECTION" setting has higher priority than the "AUDIO" settings in "LANGUAGE SETUP" (page 66). • If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order. • Depending on the DVD, the audio channel with priority may be predetermined. In this case, you cannot give priority to the DTS, Dolby Digital, or MPEG audio format by selecting "AUTO." Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level. Select "SPEAKER SETUP" in the setup display. For details, see "Using the Setup Display" (page 65). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: YES YES BEHIND(LOW) YES To return to the default setting Select the item, then press CLEAR. xSIZE When you do not connect centre or rear speakers, or move the rear speakers, set the parameters for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined. • FRONT - YES • CENTER - YES: Normally select this. - NONE: Select this if no centre speaker is used. Settings and Adjustments continued 69