Sony HCD-GSX100W Operating Instructions - Page 10

C To connect to TV, etc. If noise occurs when the transmitter is connected to the headphones jack of your TV or VCR, set the NOISE FILTER switch on the transmitter to ON. Transmitter OFF ON NOISE FILTER B R A AUDIO IN L DC IN 9V 123 CHANNEL to AUDIO IN A jacks Right channel (red) Left channel (white) Connecting cord (supplied) to stereo mini jack TV, VCR, etc. 2 Connect the transmitter to a wall outlet using the supplied AC power adaptor. The transmitter automatically turns on. to DC IN 9V jack Transmitter to wall outlet AC power adaptor (supplied: AC-GSX100) Notes • When you connect the transmitter to the analog out jacks, do not set the NOISE FILTER to ON. Otherwise, the volume will be limited. • The NOISE FILTER effects the sound only in case of such as connections B and C. In connection A, the switch has no effect. • For connections B and C, if stereo mini jack is connected to line out and the NOISE FILTER is set to ON, audio output will be reduced and audio signal may be intermittent or auto muting will activate. In this case, set the NOISE FILTER to OFF. • When the transmitter is placed on or near a TV, it may pick up a noise. In such case, place the transmitter away from the TV. • Use only the supplied AC power adaptor. Do not use any other AC power adaptor. Polarity of the plug • If the connected component has the AVLS (Automatic Volume Limiter System) function, be sure to turn off the function when using the transmitter. Otherwise, you will have to turn up the volume of the speaker, and that may cause distortion. • If the connected component has the BASS BOOST or MEGA BASS function, be sure to turn off the function when using the transmitter. Otherwise, the sound from the speaker may be distorted. • Do not place the transmitter near a fluorescent lamp, etc. when using the system. • When the source audio level is low or no audio signal is input for 10 seconds or more, the transmitter will switch to auto muting mode. • If the transmitter does not detect an audio signal for a few minutes, the power on the transmitter automatically turns off. When the transmitter receives an audio signal again, the power automatically turns on. The effective areas of the transmitter Wireless system that allows you to use your system free from the restriction of speaker cords. The optimum signal reception range is up to approximately 150 feet (46m) without the system picking up some interference. However, the distance may be reduced according to the surroundings and environment. If the system picks up some noise while using it within the above mentioned distance, reduce the distance between the transmitter unit and the main unit, or select another channel. 10GB