Sony HCD-HPX7 Service Manual - Page 4
Hcd-hpx7, Servicing Notes - model
View all Sony HCD-HPX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HCD-HPX7 SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. LASER DIODE AND FOCUS SEARCH OPERATION CHECK Carry out the "S curve check" in "CD section adjustment" and check that the S curve waveforms is output three times. • MODEL IDENTIFICATION - Rear View - Model Name Canadian model Australian model AEP, UK models Taiwan model Korean model Mexican model Other models Power requirement indication Power Voltage Indication AC: 120 V - 60 Hz AC: 230 - 240 V - 50/60 Hz AC: 230 V - 50/60 Hz AC: 120 V - 50/60 Hz AC: 220 V - 60 Hz AC: 120 V - 60 Hz AC: 120 V, 220 V, 230 - 240 V - 50/60 Hz 4