Sony HCD-HPX7 Service Manual - Page 54
Mode], Lock], Power, Manage], Change-over, Tuning, Interval], Except Aep, Uk Models, Md/video,
View all Sony HCD-HPX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
HCD-HPX7 [CD SHIP MODE] This mode can run the CD sled motor optionally. Use this mode, for instance, when cleaning the optical pick-up. Procedure: 1. Press the @/1 button to turn the power on. 2. Press the [FUNCTION] button to select CD function. 3. Press three buttons of [EX-CHANGE] and @/1 simultaneously. *1 4. Set to the CD ship mode. (chucking on) 5. After blink "STANDBY", "LOCK" is displayed, disconnect the AC plug. *1) If press three buttons of [DISC SKIP], [EX-CHANGE] and [PLAY MODE/TUNING MODE] simultaneously, Activate the CD ship mode and MC cold reset. [CD SLOT LOCK] This mode is for the antitheft of CD disc in shop. (not for transport) Procedure: 1. Press the @/1 button to turn the power on. 2. Press the [FUNCTION] button to select CD function. 3. Insert a disc. 4. While pressing the x button, press the A (CD) button for more 5 seconds. 5. The message "LOCKED" is displayed and the disc slot is locked. (Even if exiting from this mode, the disc slot is still locked) 6. If press the A (CD) button to eject the disc, the message "LOCKED" is displayed and can not eject the disc. 7. To release this lock, while pressing the x button, press the A (CD) button for 5 seconds again. 8. The message "UNLOCKED" is displayed and the disc slot is unlocked. [CD POWER MANAGE] This mode is for switch the CD power supply on/off. Even if this state pulls out AC plug, it is held. Procedure: 1. Press the @/1 button to turn the power on. 2. Press the [FUNCTION] button to select CD function. 3. Press the @/1 button again to turn the power off (standby). 4. While pressing the x button, press the @/1 button. 5. It turns power on and display "CD POWER", then display "ON" or "OFF". [CHANGE-OVER THE AM TUNING INTERVAL] (except AEP, UK models) The AM tuning interval can be changed over 9 kHz or 10 kHz. Procedure: 1. Press the @/1 button to turn the power on. 2. Press the [TUNER/BAND] button to select TUNER (AM) function. 3. Press the @/1 button again to turn the power off (standby). 4. While pressing the TUNING+ ML button, press the @/1 button. 5. It turns power on and display "STEP 9kHz" or "STEP 10kHz", and thus the tuning interval is changed over. [MD/VIDEO FUNCTION CHANGE] Select either VIDEO or MD of the external input. Procedure: 1. Press the @/1 button to turn the power on. 2. Press the [FUNCTION] button to select MD or VIDEO function. 3. Press the @/1 button again to turn the power off (standby). 4. While pressing the [FUNCTION] button, press the @/1 button. 5. The another function of the previous function is selected and display "MD" or "VIDEO". 54