Sony HCD-LF10 Operating Instructions - Page 99
Additional Information, VIDEO CD, a CD, or an MP3.
View all Sony HCD-LF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Additional Information The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the balance parameter in the [BALANCE] menu (page 93). • Make sure the "Surround Speaker Reverse" setting in the AMP menu is appropriate (page 96). There is no sound from the subwoofer. • Check that the SYSTEM CONNECTOR cord is connected correctly and securely (page 15). • Set the sound field to "Auto Format Direct Auto" (page 65). Severe hum or noise is heard. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 ft) away from your TV set or a fluorescent light. • Move your TV away from the audio components. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. • Clean the disc. The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3. • Set [AUDIO] to [STEREO] in the Control Menu display (page 62). • Make sure the system is connected appropriately. The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track. • Make sure the sound field function is on (page 64). • Check the speaker connections and settings (pages 36, 92). • Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound comes from the center speaker only. • Depending on the disc, the sound may come from the center speaker only. No sound is heard from the center speaker. • Check the speaker connections and settings. • Make sure the sound field function is on (page 64). • Depending on the source, the effect of the center speaker may be less noticeable. No sound or only a very low-level sound is heard from the surround speakers. • Check the speaker connections and settings. • Make sure the sound field function is on (page 64). • Select a sound field containing the word "Cinema Studio EX" (page 67). • Depending on the source, the effect of the surround speakers may be less noticeable. • Do not install the IR receiver in a place exposed to direct sunlight or strong light such as an incandescent lamp. • Wireless setting of the IR receiver is not correct (page 30). • The plasma display may interfere with transmission, in which case, adjust the position of the IR transmitter and IR receiver (page 30). • Clean the surface of the IR transmitter and IR receiver. Operation Radio stations cannot be tuned in. • Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) or connect an external antenna (aerial) if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. • No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 82). • Press DISPLAY so that the frequency appears in the display. The remote does not function. • There are obstacles between the remote and the system. • The distance between the remote and the system is too far. • The remote is not pointed at the external receiver (page 14). • The batteries in the remote are weak. The POWER/ON LINE indicator momentarily turns red. • When playing an MP3 or DVD disc, or when changing a disc, the indicator momentarily turns red. This is not a malfunction. continued 99GB