Sony HCD-M300AV Operating Instructions (primary manual) - Page 11
Press TUNER MEMORY., To change the AM tuning
View all Sony HCD-M300AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started 2 Press and hold + or - until the frequency indication starts to change, then release it. Scanning stops when the system tunes in a station. "TUNED" and "STEREO" (for a stereo program) appear. ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR NEXT REPEAT 1 PRESET DELETE CD TEXT PLUS ONE FILE HI-LIGHT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO kHz 1 2 REC SLEEP MHz VOLUME DOLBY NR RELAY GROUP FILE 1 2 3 4 5 3 Press TUNER MEMORY. A preset number appears in the display. Preset number ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR NEXT REPEAT 1 PRESET DELETE CD TEXT PLUS ONE FILE HI-LIGHT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO kHz 1 2 REC SLEEP MHz VOLUME DOLBY NR RELAY GROUP FILE 1 2 3 4 5 4 Press ENTER. The station is stored. The stations are stored from preset number 1. 5 Repeat steps 1 to 4 to store additional stations. To tune in a station with a weak signal Press + or - (or TUNING +/- on the remote) repeatedly in step 2 to tune in the station manually. To set an existing preset number to another station Start over from step 1. After step 3, turn SELECTOR to select the preset number you want to change, then overwrite the preset number to the desired station. To erase a preset station 1 Keep pressing TUNER MEMORY until a preset number appears in the display. ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR NEXT REPEAT 1 PRESET DELETE CD TEXT PLUS ONE FILE HI-LIGHT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO kHz 1 2 REC SLEEP MHz VOLUME DOLBY NR RELAY GROUP FILE 1 2 3 4 5 2 Turn SELECTOR to select the preset number you want to erase. Select "ALL ERASE" when you want to erase all the preset stations. 3 Press ENTER. "COMPLETE" appears. When you erase a preset number, the preset number decreases by one and all preset numbers following the erased one are renumbered. You can add a new preset number after the last preset number. To change the AM tuning interval The AM tuning interval is factory set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you disconnect the power cord or if a power failure occurs. 11