Sony HCD-M300AV Operating Instructions (primary manual) - Page 46
Connecting a DVD player, continued, When your DVD player has 5.1, channel analog outputs
View all Sony HCD-M300AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connecting a DVD player (continued) DVD 5.1CH FUNCTION Notes • Each time you press DVD 5.1CH, the function changes as follows. DVD 5.1CH y DVD (2 channel) (indicator: on) (indicator: off) • You cannot enjoy the 5.1 channel surround sound if you connect a DVD player which does not have the 5.1 channel analog outputs. • If there is no sound when you connect a DVD player which has 5.1 channel analog outputs, connect the LINE OUT (audio) output jacks of your DVD player to the MD/VIDEO IN jacks, then change the function to MD by pressing FUNCTION until "MD" appears in the display. When your DVD player has 5.1 channel analog outputs Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected DVD player, press DVD 5.1CH so that its indicator lights up. When you listen to a stereo sound track of the DVD player, press DVD 5.1CH so that its indicator goes off. When your DVD player has stereo analog outputs Make sure to match the color of the plugs and the connectors. Connect the LINE OUT (audio) output jack of your DVD player to the FRONT jacks of DVD INPUT with the audio connecting cable. To listen to the sound of the connected DVD player, press DVD 5.1CH so that its indicator goes off. 46