Sony HCD-M300AV Operating Instructions (primary manual) - Page 33

The Tape Deck Recording a CD by specifying track order - Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 10 6 1 2 CHECK CLEAR 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until "CD" appears in the display. 3 Press PROGRAM. 4 Turn SELECTOR until the desired disc number or Disc Memo appears. To program the whole disc, make sure "AL" is displayed below "TRACK" and skip to step 6. 5 Press . or > until the desired track number appears. When the disc you select has Disc Memo, it appears and then switches to the following display. ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR NEXT REPEAT 1 PRESET DELETE CD TEXT PLUS ONE FILE HI-LIGHT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO kHz 1 2 REC SLEEP MHz VOLUME DOLBY NR RELAY GROUP FILE 1 2 3 4 5 Track number 6 Press ENTER to program the track. The programmed track and corresponding step (playing order) appear in the display. Programmed track 8 x 45 3 9 CONTINUE ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR NEXT REPEAT 1 PRESET DELETE CD TEXT PLUS ONE FILE HI-LIGHT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO kHz 1 2 REC SLEEP MHz VOLUME DOLBY NR RELAY GROUP FILE 1 2 3 4 5 Programmed disc Playing order continued 33