Sony HCD-XGR600 Operating Instructions - Page 12
Listening to the radio, — Preset Tuning, — Manual Tuning, Listening to a preset station, station
View all Sony HCD-XGR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To improve tuner reception When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on. 1 Press FUNCTION repeatedly until "CD" appears. 2 Press ?/1 to turn off the system. 3 Press ?/1 while holding x. "CD POWER OFF" appears. To set CD power on Repeat the procedure above and "CD POWER ON" appears. Notes • When "CD POWER OFF" is selected, CD access time is increased. • You cannot change the setting in Power Saving Mode (page 21). To change the AM tuning interval The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNER ENTER, press ?/1 to turn the system back on. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in the Power Saving Mode (page 21). Tips • The preset stations are retained for half a day even if you disconnect the power cord or if a power failure occurs. • To improve the reception, adjust the supplied antennas or connect an external antenna. Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station - Preset Tuning Preset radio stations in the tuner's memory first (see "Presetting radio stations" on page 11). 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press TUNING MODE repeatedly until "PRESET" appears. 3 Press TUNING +/- (or PRESET +/- on the remote) repeatedly to select the desired preset station. Listening to non-preset radio station - Manual Tuning 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press TUNING MODE repeatedly until "MANUAL" appears. 3 Press TUNING +/- repeatedly to tune in the desired station. Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When an FM stereo program has static noise, press FM MODE repeatedly until "MONO" appears. There will be no stereo effect, but the reception will improve. • Press TUNING MODE repeatedly until "AUTO" appears in step 2 above, then press TUNING +/-. The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). • To record the radio programs, use manual recording (page 15). 12GB