Sony HCD-XGR600 Operating Instructions - Page 6

3 Connect the FM and AM antennas. Set up the AM loop antenna, then connect it. Extend the FM lead antenna horizontally AM loop antenna CFMOAXIAL 75 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). You can cancel the demonstration by pressing DISPLAY repeatedly (page 21). Inserting two R6 (size AA) batteries into the remote AM Note Keep the antennas away from the speaker cords. 4 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system's VOLTAGE SELECTOR for available settings. VOLTAGE SELECTOR 120V 220V 230~240V Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip When the remote no longer operates the system, replace both batteries with new ones. 6GB