Sony HCD-XGR600 Operating Instructions - Page 21

Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press TIMER SELECT (or CLOCK/TIMER SELECT on the remote). 2 Press M/m repeatedly until "REC SELECT" appears, then press ENTER. Start over from step 1. 1 Press TIMER SELECT (or CLOCK/TIMER SELECT on the remote). 2 Press M/m repeatedly until "TIMER OFF" appears, then press ENTER. Notes • You cannot activate the Daily Timer and Timer Recording at the same time. • When you use the Sleep Timer, Timer recording and Daily Timer will not turn off the system until the Sleep Timer turns it off. • If the system is on at the preset time, the Timer Recording will not be activated. • The volume is reduced to minimum when Timer recording starts. Display Turning off the display - Power Saving Mode The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display and the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * The clock is displayed only if you set the clock. Note You cannot perform the following operations in Power Saving Mode. - setting the clock (page 7) - changing the AM tuning interval (page 12) - turning on the system by pressing the function buttons (e.g., CD: NX ( or CDN on the remote)) - changing "CD POWER" settings (page 12) - switching "MD" function to "VIDEO" (page 24) Tip The timer continues to operate in Power Saving Mode. Display 21GB