Sony HCD-XGR600 Operating Instructions - Page 15

Tape - Recording/Sound Adjustment Recording on a tape manually - Manual Recording You can record just the portions you like from a CD, tape or radio program on a tape. You can also record from connected components (see "Recording audio from a connected component" on page 25). 1 Load a recordable tape into deck B. 2 Press FUNCTION or TUNER/BAND repeatedly to select the desired source to record. 3 Press z REC. Deck B stands by for recording. When you want to record on the reverse side, press h. 4 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 5 Press X, then start playing the desired source to record. Recording starts. To stop recording Press x. Note You cannot listen to other sources while recording. Tips • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • For recording from the tape: If you set the direction to j (or RELAY) when the tapes you use have different lengths, the tapes in each deck reverses independently. • For recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Sound Adjustment Adjusting the sound You can reinforce the bass and create a more powerful sound. Press X-GROOVE. Each time you press the button, the display changes as follows: X-GROOVE ON (on) Y X-GROOVE OFF (off) Tip Factory set to "X-GROOVE ON". continued 15GB