Sony HCD-XGR600 Operating Instructions - Page 14

Notes • Do not press A EJECT Z or Z B EJECT while playing a tape, otherwise the tape could be damaged. • The AMS function may not operate correctly under the following circumstances: - When the unrecorded space between songs is less than 4 seconds long. - When the system is placed near a television. Tip The deck stops automatically after repeating the sequence five times. Tape - Recording Recording your favorite CD tracks on a tape - CD-TAPE Synchro Recording You can record a whole CD on a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically. 1 Load a recordable tape into deck B. 2 Load a disc you want to record. 3 Press CD SYNC. Deck B stands by for recording. When you want to record on the reverse side, press h. 4 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 5 Press X. Recording starts. To stop recording Press x. To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 6 of "Creating your own program" (page 10). Also, you can check the required tape length for recording a disc. Press EDIT after you have loaded a disc in CD function. The required tape length for the currently selected disc appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). Notes • You cannot use Tape Select Edit when Program Play mode has been set. After clearing the entire program, follow the above procedure. • You cannot use Tape Select Edit for discs containing over 20 tracks. 14GB