Sony HCD-ZX9 Instruction Manual - Page 18

Sound Adjustment Adjusting the sound You can reinforce the bass and create a more powerful sound. Press X-GROOVE. Each time you press the button, the display changes as follows: X-GROOVE OFF Y X-GROOVE ON Tip The default setting is "X-GROOVE ON". Selecting the preset effect Press one of the Preset Effect buttons to select the preset effect you want. The preset effect name appears in the display. See the chart "Preset effect options." Preset effect options "SURR" lights up in the display if you select an effect with surround effects. Effect SALSA REGGAE POP SAMBA TANGO ROCK JAZZ DANCE MOVIE GAME For standard music sources soundtracks and special listening situations play station 1, 2 and other video game music source To cancel the effect Press EFFECT ON/OFF repeatedly until "EFFECT OFF" appears in the display. Tip You can also select the preset effect including the personal file by pressing EQ on the remote repeatedly. Adjusting the graphic equalizer and storing the personal file You can adjust the sound by raising or lowering the level of specific frequency band, then store up to a personal file (P FILE) in the memory. Before adjustment, select the preset effect you want for your basic sound. 1 Press < or , repeatedly to select a frequency band, then press M or m repeatedly to adjust the level. Frequency band Frequency level 2 Press and hold down P FILE until "P FILE MEMORY" appears in the display. The setting is stored automatically in the personal file. The previous setting stored at this memory location is erased and replaced by the new setting. To call up the personal file Press P FILE. Tip If you do not want to store a personal file, press ENTER after step 1. 18US