Sony HCD-ZX9 Instruction Manual - Page 24
Display, Turning off the display, — Power Saving Mode - standby
View all Sony HCD-ZX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
7 Press DIRECTION repeatedly to select "g" to record on one side. Select "j" (or "RELAY") to record on both sides. If you want to record on the reverse side, press h (TAPE B). Then, press x (TAPE B). When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. 8 Press ?/1 to turn off the system. When the recording starts, the volume level is set to minimum. Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. 2 Press M or m (or >+ or -. on the remote) repeatedly until "REC SELECT?" flashes in the display, then press ENTER. Start from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press M or m (or >+ or -. on the remote) repeatedly until "TIMER OFF?" flashes in the display, then press ENTER. Notes • You cannot select the Play Timer and Timer Recording at the same time. • If you use the Timer Recording and Sleep Timer at the same time, the Sleep Timer has priority. • The Timer Recording will not activated if the system is on. • Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before preset time). Tips • The system turns on 15 seconds before the preset time. • When the Timer Recording is selected, the "REC" lights up in the display. Display Turning off the display - Power Saving Mode The demonstration display and the clock display can be turned off to minimize the amount of power consumed during standby mode (Power Saving Mode). Press DISPLAY repeatedly while the system is turned off until the demonstration display and the clock display disappears. To cancel Power Saving Mode Press DISPLAY once to show the demonstration display or twice to show the clock display. Each time you press the button, the display changes cyclically as follows: Demonstration display1) t Clock display2) t Power Saving Mode 1) The display changes and the indicators flashes even when the system is turned off. 2) "--.--" appears in the display if you have not set the clock. Note You cannot do the following operations in Power Saving Mode. - setting the clock (page 9) - changing the AM tuning interval (page 14) - turning on the system by pressing the following buttons (a) TUNER/BAND (b) GAME (c) h/H (TAPE A) (d) h/H (TAPE B) (e) NX (CD) (f) CD on the remote (g) TAPE on the remote - changing "CD POWER" settings (page 14) - switching the VIDEO/MD function (page 28) Tips • The timer continues to operate in Power Saving Mode. • The ?/1 indicator lights up even in Power Saving Mode. 24US