Sony HCD-ZX9 Instruction Manual - Page 9
Positioning the speakers, Setting the clock, Getting Started - remote
View all Sony HCD-ZX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Notice for carrying this system Do the following procedure to protect the disc mechanism. Use buttons on the system for the operation. 1 Press ?/1 to turn on the system. 2 Make sure that all discs are removed from the system. 3 Hold down REPEAT and then press ?/1 until "LOCK" appears in the display. 4 Release ?/1 first, then release REPEAT. 5 Unplug the power cord. When carrying the front and surround speakers Do not carry the front and surround speakers by their sub panel. Otherwise, the speakers may be damaged. Sub panel Positioning the speakers There are 3 ways to place the front speakers and the surround speakers. Example 1: Place the surround speakers on the top of the front speakers as shown below. Surround Speaker (L) Main Unit Surround Speaker (R) Front Speaker (L) 45 Front Speaker (R) Listener Example 2: Place the speakers at an equal distance from your listening position as shown below. Front Speaker (L) Main Unit Front Speaker (R) Listener Surround Speaker (L) Surround Speaker (R) Example 3: Place the front speakers in one room and the surround speakers in another room. Setting the clock 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. "CLOCK" appears in the display. Then, the hour indication flashes in the display. 3 Press M or m (or >+ or -. on the remote) repeatedly to set the hour. 4 Press ENTER. The minute indication flashes in the display. 5 Press M or m (or >+ or -. on the remote) repeatedly to set the minute. 6 Press ENTER. The clock starts functioning. To adjust the clock 1 Press CLOCK/TIMER SET. "PLAY SET?" flashes in the display. 2 Press M or m (or >+ or -. on the remote) to select "CLOCK SET?", then press ENTER. The hour indication flashes in the display. 3 Do the same procedures as step 3 to 6 above. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. 9US