Sony HDR-CX700V Handycam® Handbook - Page 102
Playback, subject does not appear on the screen.
UPC - 027242820135
View all Sony HDR-CX700V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Table of Contents There is a time difference between the point when START/STOP is pressed and the point that the recording movie is started or stopped actually. On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction. The screen image is bright, and the subject does not appear on the screen. Press NIGHTSHOT to cancel the NightShot function (p. 82). Horizontal stripes appear on the images. This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction. Enjoy Useful Functions The horizontal to vertical ratio of the movie (16:9 (wide)/4:3) cannot be changed. The horizontal to vertical ratio of high definition image quality (HD) movies is 16:9 (wide). The auto focus does not function. Set [Focus] to [Auto] (p. 77). The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 77). SteadyShot does not function. Set [ SteadyShot] to [Active] or [Standard], [ SteadyShot] to [On] (p. 81). Even if [ SteadyShot] is set to [Active] or [Standard], [ SteadyShot] to [On], your camcorder may not be able to compensate for excessive vibrations. The subjects passing by the screen very fast appear crooked. This is called the focal plane phenomenon. This is not a malfunction. Because of the way the image device (CMOS sensor) reads out image signals, the subjects passing by the lens rapidly might appear crooked depending on the recording conditions. Black bands appear when you record a TV screen or computer screen. Set [ SteadyShot] to an option except for [Active] (p. 81). [LCD Brightness ] cannot be adjusted. You cannot adjust [LCD Brightness ] when: The LCD panel is closed on your camcorder with the LCD screen facing out. The power is supplied from the AC Adaptor. Sound is not recorded correctly. If you disconnect an external microphone, etc. during recording movies, sound may not be recorded correctly. Connect the microphone again in the same way as when you start recording movies. Playback Images cannot be played back. Select the type of recording media you want to play back (p. 21). Select the image quality of the movie you want to play back (p. 37). Images recorded on other devices may not be played back. This is not a malfunction. Index The color of the image is not correctly displayed. Press NIGHTSHOT to cancel the NightShot function (p. 82). US 102