Sony HMD-A100 Operating Instructions - Page 12
Additional settings, DEGAUSS/CANCEL MOIRE, Resetting the adjustments RESET
![]() |
View all Sony HMD-A100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Additional settings (DEGAUSS/CANCEL MOIRE) You can manually degauss (demagnetize) the screen, and cancel the moire. 1 Press the center of the control button. The main MENU appears on the screen. 2 Move the control button m/M to highlight DEGAUSS/CANCEL MOIRE and press the center of the control button again. The DEGAUSS/CANCEL MOIRE menu appears on the screen. 3 Move the control button m/M to select the desired adjustment item. Adjust the selected item according to the following instructions. Degaussing the screen The monitor is automatically demagnetized when the power is turned on. To manually degauss the monitor, first move the control button m/M to select (DEGAUSS). Then move the control button ,. The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. Cancelling the moire* If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level. To adjust the amount of moire cancellation, first move the control button m/M to select (CANCEL MOIRE). Then move the control button
![](/manual_guide/products/sony-hmda100-operating-instructions-232da50/12.png)