Sony HMD-A100 Operating Instructions - Page 16

Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard. MENU 1 (power) indicator If the 1 (power) indicator is green 1 Disconnect the video input cable, or turn off the connected computer. 2 Press the 1 (power) button to turn the monitor off and on. 3 Move the control button , for 2 seconds before the monitor enters power saving mode. MENU If all three color bars appear (red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer. If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor's condition. If the 1 (power) indicator is flashing orange Press the 1 (power) button to turn the monitor off and on. If the 1 (power) indicator lights up green, the monitor is working properly. If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor's condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and video board. Specifications HMD-A100 CRT Viewable image size Resolution Standard image area Deflection frequency* AC input voltage/current Power consumption Dimensions Mass Plug and Play Supplied accessories 0.25 mm aperture grille pitch 15 inches measured diagonally 90-degree deflection Approx. 285 × 215 mm (w/h) (11 1/4 × 8 1/2 inches) 14.0" viewing image Horizontal: Max. 1280 dots Vertical: Max. 1024 lines Approx. 270 × 202 mm (w/h) (10 3/4 × 8 inches) Horizontal: 30 to 70 kHz Vertical: 48 to 120 Hz 100 to 120 V, 50 - 60 Hz, 1.9 A Max. 95 W (with no USB devices connected) Approx. 373 × 372 × 425 mm (w/h/d) (14 3/4 × 14 3/4 × 16 3/4 inches) Approx. 15 kg (33 lb 11 oz) DDC1/DDC2B See page 6 * Recommended horizontal and vertical timing condition • Horizontal sync width should be more than 1.0 µsec. • Horizontal blanking width should be more than 3.6 µsec. • Vertical blanking width should be more than 500 µsec. HMD-A200 CRT Viewable image size Resolution Standard image area Deflection frequency* AC input voltage/current Power consumption Dimensions Mass Plug and Play Supplied accessories 0.25 mm aperture grille pitch 17 inches measured diagonally 90-degree deflection Approx. 327 × 243 mm (w/h) (12 7/8 × 9 5/8 inches) 16.0" viewing image Horizontal: Max. 1280 dots Vertical: Max. 1024 lines Approx. 312 × 234 mm (w/h) (12 3/8 × 9 1/4 inches) Horizontal: 30 to 70 kHz Vertical: 48 to 120 Hz 100 to 120 V, 50 - 60 Hz, 2.0 A Max. 115 W (with no USB devices connected) Approx. 460 × 378 × 441 mm (w/h/d) (18 1/8 × 15 × 17 3/8 inches) Approx. 19 kg (41 lb 14 oz) DDC1/DDC2B See page 6 * Recommended horizontal and vertical timing condition • Horizontal sync width should be more than 1.0 µsec. • Horizontal blanking width should be more than 3.0 µsec. • Vertical blanking width should be more than 500 µsec. Design and specifications are subject to change without notice. 16