Sony HMZ-T1 Reference Guide - Page 23
Guide of HDMI device control, Power off when, unmounted, Illumination, Language setting
View all Sony HMZ-T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Power off when unmounted Illumination Language setting Prolonged viewing warning Startup viewer warning Reset to factory settings On: Turns the system off automatically 30 minutes after you take the head mounted unit off. Off: Deactivates this function. Tip • Regardless of this setting, the screens will go off automatically 10 seconds after you remove the head mounted unit. On: Activates the illumination on the head mounted unit. Off: Deactivates this function. Sets the language used for menus and other interface elements. Notes • Audio is muted while this setting is configured. • The volume cannot be adjusted while this setting is configured. On: Activates automatic display of a warning about whether to turn the power off after 3 hours of continuous viewing. Selecting "Yes" on the warning screen will turn the power off. Selecting "No" will cause the power to be turned off 3 hours later, after 6 hours of continuous viewing. Off: Deactivates this function. Notes • When the warning is displayed after 3 hours of viewing, if no response is made in 90 seconds, the power will automatically be turned off. • A warning screen will be displayed at 30 minutes and 5 minutes before the system will turn itself off. On: Activates automatic display of a startup warning. Off: Deactivates this function. Resets all settings to the original default values. Note • The password set in "Set password" (in "General Setup") will also be cleared. Guide of HDMI device control Displays the operation guide for head mounted unit buttons that can be used with "Control for HDMI" function (page 22). 23