Sony HMZ-T1 Reference Guide - Page 24

Troubleshooting, Power Supply

Page 24 highlights

Troubleshooting If the following symptoms occur when using the system, check the Cause/Action column before requesting service. If the issue persists, contact your Sony dealer or local authorized Sony service center. Power Supply Symptom Cause/Action The system does not turn on p Confirm that the AC power cord is fully plugged in. p Make sure the head mounted unit connecting cord is fully inserted in the HMD OUT jack. p Startup normally takes a few seconds. The system does not go off p Hold down the 1 (Power On/Standby) button for at least one second. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

24
If the following symptoms occur when using the system, check the Cause/Action column
before requesting service. If the issue persists, contact your Sony dealer or local authorized
Sony service center.
Power Supply
Troubleshooting
Symptom
Cause/Action
The system does not turn
on
p
Confirm that the AC power cord is fully plugged in.
p
Make sure the head mounted unit connecting cord is fully
inserted in the HMD OUT jack.
p
Startup normally takes a few seconds.
The system does not go off
p
Hold down the
1
(Power On/Standby) button for at least
one second.