Sony HT-7100DH Operating Instructions - Page 30

Performing Auto Calibration Input buttons ? / 1 TV RM SET UP AV ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER AUX DMPORT RECEIVER 2CH A.F.D. MOVIE MUSIC CATEGORY SLEEP MODE D.TUNING AUTO CAL 123 456 7 -/-- CLEAR >10 GUIDE 89 0/10 F ENTER MEMORY DISPLAY G g MASTER VOL +/- MUTING f O RETURN/ EXIT MENU OPTIONS TOOLS - CATEGORY + REPLAY ADVANCE . > TUNING - TUNING + m M DISC SKIP TV VOL TV CH MASTER VOL PRESET MUTING ?/1 switch AUTO CAL DVD Press AUTO CAL. The following appears on the display. A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] The measurement process will take a few minutes to complete. The table below shows the display when measurement starts. Measurement for Environment noise level Speaker connection Speaker level Speaker distance Display NOISE.CHK MEASURE and SP DET. appears alternately* MEASURE and GAIN appears alternately* MEASURE and DISTANCE appears alternately* * The corresponding speaker indicator lights up in the display during measurement. When measurement ends, "COMPLETE" appears on the display and the settings are registered. When you have finished Disconnect the optimizer microphone from the receiver. Notes • Auto Calibration cannot detect the sub woofer. Therefore, all sub woofer settings will be maintained. • You cannot select Auto Calibration when headphone is connected. Tips • When Auto Calibration starts: - Stand some distance from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement. - Avoid making noise to get a more accurate measurement. • The Auto Calibration function will be canceled when you do the following during the measurement process: - Press ?/1, input buttons or MUTING. - Change the volume level. - Press AUTO CAL again. 30US