Sony HT-7100DH Operating Instructions - Page 7

Getting Started About the indicators on the display 1 2 34 5 67 SW LFE SP A ; D L C R SP B SL S SR ; PL II ; PL OPT DTS COAX 8 CAT MEMORY ST D.RANGE MONO qd qs qa q; 9 Name A SW B LFE C SP A/SP B D ;D E ;PL/ ;PL II Function Lights up when the audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up according to the speaker system used. However, these indicators do not light up if the speaker output is turned off or if a headphone is connected. Lights up when the receiver is decoding Dolby Digital signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG" (page 63). "; PL" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PL II" lights up when the Pro Logic II Movie or Music decoder is activated. Name F OPT G DTS H Tuner indicators I Preset station indicators J D.RANGE Function Lights up when VIDEO 2 input is selected. However, "UNLOCK" appears on the display if no digital signal is input through the OPTICAL jack. "OPT" also lights up when SAT input is selected if - INPUT MODE is set to "AUTO IN" and the source signal is a digital signal being input through the OPTICAL jack. - INPUT MODE is set to "OPT IN" (page 63). Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG" (page 63). Lights up when using the receiver to tune in radio stations (page 52), etc. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 54. Lights up when dynamic range compression is activated (page 41). continued 7US