Sony HT-7100DH Operating Instructions - Page 32

To change the settings manually 1 Record down the warning code. 2 Press RECEIVER. The RECEIVER indicator lights up and receiver operation is activated. 3 Press . 4 Press ?/1 to turn off the receiver. 5 Follow the solution provided in the "Warning codes and solutions" below. 6 Turn on the receiver and perform Auto Calibration again (page 30). Warning codes and solutions Warning Explanation code Solution WARN. 40 The environment is noisy. Make sure the environment is quiet during Auto Calibration. WARN. 50 The center speaker Be sure to connect is not connected. the center speaker. WARN. 51 The surround Be sure to connect speakers are not the surround connected. speakers. WARN. 60 The front speaker Reposition your balance is out of front speakers.c) range. WARN. 62 The center speaker Reposition your level is out of center speaker.d) range. WARN. 63 The surround left Reposition your speaker level is out surround left of range. speaker.e) WARN. 64 The surround right Reposition your speaker level is out surround right of range. speaker.f) WARN. 70 The front speaker Reposition your distance is out of front speakers.c) range. WARN. 72 The center speaker Reposition your distance is out of center speaker.d) range. WARN. 73 The surround left Reposition your speaker distance is surround left out of range. speaker.e) WARN. 74 The surround right Reposition your speaker distance is surround right out of range. speaker.f) c)For details, refer "Front speaker distance" (page 45). d)For details, refer "Center speaker distance" (page 45). e)For details, refer "Surround left speaker distance" (page 45). f) For details, refer "Surround right speaker distance" (page 45). 32US