Sony HT-ST5 Operating Instructions - Page 16
SET BT, Function, Default, Speed HDMI cable. ON/OFF
View all Sony HT-ST5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16US Menu HDMI SET BT CTRL (Control for HDMI) P. THRU (Pass through) ARC (Audio return channel) BT PWR (BLUETOOTH power) BT.STBY (BLUETOOTH standby) AAC (Advanced audio coding) APTX (aptX) Function To switch the Control for HDMI function on or off. (ON/OFF) Refer to "Using the Control for HDMI function" (page 11) for details. To set the power saving mode of the pass-through function for HDMI signals. (AUTO/ON) AUTO: Outputs signals from the HDMI OUT jack of the system in standby mode according to the status of the TV. This setting saves power in standby mode compared with the "ON" setting. ON: Always outputs signals from the HDMI OUT jack in standby mode. If any TV other than "BRAVIA" is connected, use the system with the "ON" setting. Note: This item appears only when "CTRL (Control for HDMI)" is set to "ON." To listen to digital sound from a TV compatible with the Audio Return Channel (ARC) technology that is connected using a High Speed HDMI cable. (ON/OFF) Note: This item appears only when "CTRL (Control for HDMI)" is set to "ON." To switch the BLUETOOTH function of this system on and off. (ON/ OFF) Note: If you change the setting to "OFF," the BLUETOOTH function and the NFC function become disabled. When the system has pairing information, the system is in the BLUETOOTH standby mode even when it is turned off. (ON/OFF) To set whether or not the system will use AAC via BLUETOOTH. (ON/OFF) Note: If you change the setting when the system is connected with a BLUETOOTH device, the system will be disconnected from the device. To set whether or not the system will use aptX via BLUETOOTH. (ON/OFF) Note: If you change the setting when the system is connected with a BLUETOOTH device, the system will be disconnected from the device. Default ON AUTO ON ON ON ON ON