Sony HT-ST5 Operating Instructions - Page 7
Mounting the Bar Speaker on a wall, Hang the Bar Speaker on the screws.
View all Sony HT-ST5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Useful functions Mounting the Bar Speaker on a wall You can mount the Bar Speaker on a wall. Notes When you mount the Bar Speaker on the wall, detach the stands beforehand (page 6). Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely to two studs in the wall beam. Install the Bar Speaker horizontally, hung by screws in studs in a continuous flat section of the wall. Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural calamity, etc. 1 Prepare screws (not supplied) that are suitable for the holes on the rear of the Bar Speaker. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 4.6 mm (3/16 in) 10 mm (13/32 in) Hole on the rear of the Bar Speaker 2 Fasten the screws to two studs in the wall. The screws should protrude by 8 mm to 9 mm (approx. 11/32 in). 846 mm (33 3/10 in) 8 mm to 9 mm (approx. 11/32 in) 3 Hang the Bar Speaker on the screws. Align the holes at the rear of the Bar Speaker with the screws, then hang the Bar Speaker on the two screws. Note When you use an HDMI IN 3 jack of the wall-mounted Bar Speaker, connect the swivel-type High Speed HDMI cable. 7US