Sony HT-ST5 Operating Instructions - Page 17
Useful functions, SYSTEM, Function, Default
View all Sony HT-ST5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Useful functions Menu SYSTEM A. STBY (Auto standby) IR REP. (IR repeater) VER (Version) SYS.RST (System cold reset) WS SEC. ON/SEC.OFF (Secure link on/ Secure link off) BAND (Band mode select) LNK.CHK (Link check) Function To switch the AUTO POWER OFF function on or off. (ON/OFF) The system turns off automatically when no operation has been made within a certain period (about 20 minutes) and the system is not receiving an input signal. Enables the system to relay the signal from a remote control to the TV. (ON/OFF) Refer to "Enabling the IR repeater function" (page 8) for details. To display the current firmware version. To reset menus and settings (sound fields, etc.) of the system to the initial status when it does not work properly. Refer to "Troubleshooting" (page 23) for details. When the Secure Link connection is not established, "SEC. ON" appears. SEC. ON: Allows you to link the specified Bar Speaker and subwoofer when there are several wireless sound devices within range. When the Secure Link connection is established, "SEC.OFF" appears. SEC.OFF: Releases the Secure Link setting. Refer to "Enabling the Secure Link function" (page 9) for details. To switch the system frequency band mode between 5.2 and 5.8 GHz bands. (AUTO/5.2GHz/5.8GHz) Note: This item only appears when regions correspond to both 5.2 and 5.8 GHz frequency bands. To check whether the wireless sound system of the system can connect or not. (OK/NG) Default ON OFF - - - AUTO - 17US