Sony HTCT500 Operating Instructions - Page 100

• Remove any obstacles in the path between the remote and the front panel display. • Replace both batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote. The volume turns down when the output method changes from the TV speaker to the system speaker. • The Volume Limit function is working. For details, see "Using the Volume Limit function" (page 62). If the system still does not operate properly after performing the above measures, reset the system as follows: Use the buttons on the subwoofer for this operation. 1 Press ?/1 to turn on the power. 2 Press INPUT SELECTOR, VOLUME -, ?/1 at the same time. "COLD RESET" appears and the system is reset. The system menu, sound field, etc., return to the default settings. Specifications Formats supported by this system Digital input formats supported by this system are as follows. Format Dolby Digital DTS Linear PCM (2ch)* Linear PCM (5.1ch, 7.1ch)* (Only on HDMI) Dolby Digital Plus Dolby True HD DTS-HD Supported/Not supported a a a a × × × * Linear PCM accepts sampling frequencies of no more than 48 kHz. AUDIO POWER SPECIFICATIONS for the U.S. model POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohm loads, both channels driven, from 180 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 milli watts to rated output. Amplifier Section U.S. models: Power output (reference): RMS output power FL/FR/C*: 100 watts (per channel at 4 ohms, 1 kHz, 10 % THD) Subwoofer: 100 watts (4 ohms, 100 Hz, 10 % THD) Canadian models: Power output (rated): FL/FR: 80 W + 80 W (at 4 ohms, 1 kHz, 1 % THD) Power output (reference): RMS output power FL/FR/C*: 100 watts (per channel at 4 ohms, 1 kHz, 10 % THD) Subwoofer: 100 watts (4 ohms, 100 Hz, 10 % THD) 100US