Sony ICD-UX300 Operating Instructions - Page 36

Recording via Other Devices, Recording with an external microphone, microphone

Page 36 highlights

Recording via Other Devices Recording with an external microphone Stereo microphone 2 Press v or V on the control button to select "MIC IN," and then press N/ ENT. m (microphone) jack x STOP z REC/PAUSE N/ENT v, V 1 Connect an external microphone to the m (microphone) jack when the IC recorder is in the stop mode. "Select Input" appears in the display window. If "Select Input" is not displayed, set it in the menu (page 69). 36 GB 3 Press x STOP to exit the menu mode. 4 Press z REC/PAUSE to start recording. The built-in microphones are automatically cut off. If the input level is not strong enough, adjust the microphone sensitivity on the IC recorder. When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder. z Recommended microphones You can use the Sony ECM-CS10, ECM-CZ10, ECM-DS70P, ECM-DS30P electret condenser microphone (not supplied).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

36
GB
Recording via Other Devices
Recording with an external
microphone
1
Connect an external microphone to the
m
(microphone) jack when the IC
recorder is in the stop mode.
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 69).
2
Press
v
or
V
on the control button to
select “MIC IN,” and then press
N
/
ENT.
3
Press
x
STOP to exit the menu mode.
4
Press
z
REC/PAUSE to start recording.
The built-in microphones are
automatically cut off.
If the input level is not strong enough,
adjust the microphone sensitivity on the
IC recorder.
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.
z
Recommended microphones
You can use the Sony ECM-CS10,
ECM-CZ10, ECM-DS70P, ECM-DS30P
electret condenser microphone (not supplied).
v
,
V
Stereo microphone
x
STOP
z
REC/PAUSE
N
/ENT
m
(microphone) jack