Sony ICD-UX300 Operating Instructions - Page 93
Symptom, Remedy, Noise is heard.
UPC - 027242768345
View all Sony ICD-UX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Symptom Remedy Sound comes from the • If you plug in the headphones not securely during playback, the speaker even when the sound may come from the speaker. Unplug the headphones, and headphones are plugged in. then insert them securely. The operation indicator does • "LED" is set to "OFF." Display the menu and set "LED" to "ON" not light. (page 67). "Memory Full" is displayed • The memory is full. Erase some of the messages (page 26) or and you cannot start erase all the messages after you store them on your computer. recording. "File Full" is displayed and you cannot operate the IC recorder. • 99 messages have been recorded in the selected folder or 990 messages (when there are 10 folders) in total have been recorded. Therefore you cannot record another message, or move a message. Erase some of the messages (page 26) or erase all the messages after you store them on your computer. Recording is interrupted. • The VOR function is activated. Set "VOR" to "OFF" in the menu (page 32). Noise is heard. • An object, such as your finger, etc., accidentally rubbed or scratched the IC recorder during recording so that noise was recorded. • The IC recorder was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. • Plug of the connected microphone was dirty when recording. Clean the plug. • The i (headphones) plug is dirty. Clean the plug. Recording level is low. • "Mic Sensitivity" (microphone sensitivity) is set to "Low ." • Display the menu and set "Mic Sensitivity" to "High " or "S-High " (page 29). The VOR function does not • The synchronized recording function is activated (page 37). Set work. "SYNC REC" to "OFF" in the menu (page 69). Troubleshooting 93GB