Sony KDF 50WE655 Operating Instructions - Page 19
Place back the lamp cover, then tighten the screw., Reattach the front panel securely. - lamp light on
UPC - 027242648500
View all Sony KDF 50WE655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Introducing the Sony LCD Projection TV Introducing the Sony LCD Projection TV Place back the lamp cover, then tighten the screw. ✍ If the screw of the lamp cover is slanted, the lamp may not light up properly. In such a case, take out the screw and reinsert it straight into the screw hole, then tighten the screw completely (see page 126). ✍ If the lamp cover is not reattached securely, the self-diagnostic function may be triggered and the POWER/STANDBY indicator flashes three times (see page 126). 7 Reattach the front panel securely. 8 Tightly screw the side panel in its place. This illustration is for KDF-50WE655. The screw for KDF-42WE655 is more to the inside. ✍ Consult your Sony dealer for a Sony XL-2100U or XL-2100 (for WE655 series) replacement lamp. ✍ Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause the LCD projection TV to fall, damaging the TV, the TV stand and/or the floor. (Continued) 19