Sony KDL-40XBR7 Operating Instructions - Page 9
Bundling the Connecting Cables, Connecting the AC Power Cord for KDL-70XBR7, Anchor the TV to the Wall - wall mount
UPC - 027242739109
View all Sony KDL-40XBR7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Anchor the TV to the Wall Use the hardware listed below (not supplied): • Two M6 × 10-12 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the TV) • Rope or chain (attach to one M6 anchor bolt) • Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope through the wall-anchor, then attach to the other M6 anchor bolt) Anchor bolts Bundling the Connecting Cables You can bundle the connecting cables as illustrated below. Wall-mount holes Rope or chain Wallanchor ~ • Do not bundle the AC power cord with other connecting cables. For KDL-70XBR7 Securing the TV to the wall with cords. Tie firmly 1 2 1 Thread strong cords or chains (not supplied) through the handle on the rear side of the TV, and tie firmly. 2 Secure the cords or chains to a stable place, such as a wall or column. ~ • Securing the TV to the stand without securing it and the stand to the wall provides minimum protection against the TV toppling over. For further protection, follow all three measures recommended above. Connecting the AC Power Cord for KDL-70XBR7 1 Connect the AC power cord (supplied) to the AC IN jack of the TV. 2 Secure the AC plug holder to the display's AC IN jack. AC IN (power supply input) jack on the display AC plug holder (supplied) AC power cord (supplied) 1 Attach the AC plug holder 2 Clip on to the AC IN to the AC power cord. jack until you hear clicking. ~ • When you unplug the AC power cord, drag the holder down by pushing both sides of the holder, then pull out the plug. 9