Sony KDL-70R520A Operating Instructions - Page 8
Attaching the Table-Top Stand - tv stand
View all Sony KDL-70R520A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Attaching the Table-Top Stand Refer to the supplied Table-Top Stand instruction leaflet for proper attachment. • Be careful to not pinch your hands or the AC power cord when you install the TV set to the Table- Top Stand. 1 Place the TV set on the Table-Top Stand. 2 Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks indicate the location of the screw holes used for securing the Table-Top Stand. KDL-70R550A/70R520A/60R550A/ 60R520A KDL-50R550A • Hold the TV with one hand to avoid it dropping when attaching. • Align the TV from the top, slide it in until the guide pins cannot be seen. • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. • When detaching the Table-Top Stand, reverse the attaching procedure. Do not remove any screws other than those used when attaching the Table-Top Stand. 8