Sony KDL-V40XBR1 Operating Instructions - Page 97
General, POWER, Parental Lock, Reset, Label Video Inputs
UPC - 027242677272
View all Sony KDL-V40XBR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Problem Error icon is displayed Possible Remedies Other Information The file is not a valid MPEG1 or JPEG format, or it is a progressive JPEG (which is not supported). The thumbnail is not DCF-compatible. The file is a JPEG or an MPEG1, but the thumbnail is unreadable. The file is unreadable. General Problem Possible Remedies How to reset the TV to factory ❑ Turn on the TV. While holding down the V button on the remote control, press the settings POWER button on the TV. (The TV will turn itself off, then back on again.) Release the V button. WARNING: The Reset will clear all of your customized settings including Parental Lock setting. How to restore Video settings ❑ Select Reset setting option while in the Video setting (see page 71). to factory settings How to restore Audio settings ❑ Select Reset setting option while in the Audio setting (see page 74). to factory settings Cannot cycle through the other ❑ Be sure the Label Video Inputs option is not set to Skip (see page 85). video equipment connected to the TV Cannot operate the setting ❑ If a setting option appears in gray, this indicates that the setting option is not available. Lost password ❑ On the password screen (see page 82), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. TIMER LED on front panel is ❑ When lit, indicates that the timer is set (see page 90). When the timer is set, this lit LED will remain lit even when the TV is turned off. Digital cable box does not work ❑ If you are connecting a VCR and digital cable box using a splitter, as described on page 34, you must use a special bi-directional splitter that is designed to work with your digital cable box. Contact your cable provider for details. Cannot record digital channels ❑ Only analog channels can be recorded to your VCR. to VCR TV cabinet creaks ❑ When the TV is in use, there is a natural rise in temperature, causing the cabinet to expand or contract and may be accompanied by a slight creaking noise. This is not a malfunction. Other Information 97