Sony KLV-30XBR900 Operating Instructions - Page 56
Programming the Remote Control, FUNCTION, ENTER, POWER
UPC - 027242619630
View all Sony KLV-30XBR900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Remote Control Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player Programmable Code Number 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedure to program the remote control. The equipment must have infrared (IR) remote capability in order to be used with the remote control. 1 Turn to the list of "Manufacturer's Codes" on page 55, and find the three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first.) 2 Press FUNCTION repeatedly until the DVD/VCR or SAT/CABLE indicator lights up. 3 While the desired indicator is lit, enter the three-digit manufacturer's code number. 4 Press ENTER. You must do step 4 within 10 seconds of step 3, or you must redo steps 3 through 4. 5 To check if the code number works, aim the TV's remote control at the equipment and press POWER that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer. Notes s If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. s If you enter a new code number, the code number you previously entered at that setting is erased. s In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment's own remote control unit. s Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset. 54