Sony KP-57WS500 Operating Instructions - Page 28
Connecting a Digital TV Receiver
View all Sony KP-57WS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing and Connecting the Projection TV Connecting a Digital TV Receiver z Be sure to read the Set-top box manual. z Some Digital TV Receivers are equipped with a DVI connection. Refer to your Digital TV Receiver manual for setup instructions using this connection. Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the Digital TV Set-top box's Y, PB and PR jacks to the projection TV. ✍ The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. ✍ Component video connection is necessary to view 480p, 720p, and 1080i formats. You may also use the S VIDEO or Composite Video connections, however, component video (Y, PB, PR) will provide the best picture quality for all format types. 2 Using an audio cable, connect the Digital TV Set-top box's Audio OUT jacks to the projection TV's AUDIO IN jacks. Rear of projection TV PR VMC-10HG (not supplied) PB Y Digital TV Set-top box AUDIO-R (red) AUDIO-L (white) RK-74A (not supplied) ✍ You cannot record the signal from any equipment connected into the Y, PB and PR connectors. ✍ This projection TV is not compatible with digital TV receivers configured with RGB or VGA output connectors. ✍ The DVI connection is compliant with the EIA-861 standard and is not intended for use with personal computers. 28