Sony KV-2647RX Primary User Manual - Page 14

ANTENNA CONNECTION If your local signal is strong, an indoor antenna may be sufficient to obtain a clear picture. The use of an external antenna is recommended especially in difficult reception areas (inside steel-frame buildings, in mountainous areas, or at great distances from the transmitter). VHF antenna When the \ cable is a \ 75-ohm coaxial type (round) r j-----F-type Connecfor (optional) 5 mm (3/16 in.) 10 mm 2 mm (7/16 in.) (1/8 in.) Fold back. 0 44D) Pass the ring over cable. 0 Crimp. to VHF Ifitk 0 0 UHF antenna 300-ohm ribbon type wire to UHF 0 Connect the wire and tighten the screws. When the cable is a 300-ohm ribbon type lead-in (flat) 0 Connect the leads. to VHF 17, 0 Antenna Connector (supplied) 15 mm (518 in.) '.7 Fasten with a screwdriver. 0 -Plug id'. 0 1 Combination VHF/UHFAntenna Most combination antennas already have a signal splitter. if you need a splitter or a complete antenna system, see your Sony dealer or a qualified technician. VHF-UHF signal splitter VHF UHF tit Connect the CATV coaxial cable to the VHF antenna terminal. We recommend that you consult with your cable company to make sure that the cable is properly connected. 14