Sony KV-27SXR10 Operating Instructions - Page 14

Timer/Block Available Functions Internal clock Program start TIMER Channel BLOCK Once the internal clock is set, the current time will appear on the screen. It is necessary to set the clock correctly to activate the program start TIMER and channel BLOCK. Makes a program of your choice appear on the screen automatically at the desired time. Blocks a channel from appearing on the screen for 12 hours. Use channel BLOCK to prevent children from watching undesirable programs. The buttons used for the above functions are located on the Remote Commander. Note • All settings will be erased from the unit's memory if the unit is unplugged, or if a power failure occurs. • The TIMER and BLOCK will operate only if the clock is set correctly. • If the TIMER and BLOCK are set for overlapping times on the same channel, the blocked channel will appear on the screen at the time set on the TIMER. About the Indication of Timer/Block Setting To set the internal clock, program start TIMER and channel BLOCK, you must summon the corresponding "pages": "clock page," "TIMER page" and "BLOCK page." To change the "pages," press TIMER/BLOCK. T/B stands for "Press the TIMER/BLOCK button." T/B "normal page" ) T/B (CH/ BLOCK) PH,ONI L 9:00nm "BLOCK page" ndications in red) T/B 9:OOaM after 2 seconds 9:00 "AM"/"PM" indication disappears ( "clock page" ) ( "clock page" ) T/B I before "AM"/"PM" indication disappears T/B ..8.11•••...toP (T,I)1ER SET) MO 9:00nm ( "TIMER page" ) 14