Sony KV-27SXR10 Operating Instructions - Page 20
antennas, connected, system, installer, U.S.A., Cable, special, converter, decoder
View all Sony KV-27SXR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
When both VHF and UHF antennas are connected Prepare the VHF antenna end using the appropriate connector as illustrated in W. Attach an optional EAC-66 U/V mixer to the TV antenna terminal, and connect the cables to the U/V mixer. VHF-- Rear of TV VHF/UHF UHF El Cable with a special converter (decoder) Pay cable TV systems use scrambled or encoded signals and require special converters (decoders)* in addition to the normal cable connection. Connect the converter (decoder) with a 75-ohm coaxial cable (optional). AUX to CONVERTER VHF/UHF F EAC-66 , a Notes When the cable is connected to the TV with the U/V mixer, snow and noise may appear in the pictures of the cable TV channels over 37 (VV + 1). Note to CATV system installer in the U.S.A. This reminder is provided to call the CAN system installer's attention to Article 820-22 of the NEC that provides guidelines for proper grounding and, in particualr, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Pay TV Cable Input Output Special converter (decoder) *The special converter (decoder) will be supplied by the cable company. For customers in the USA The supplied antenna connector will be used also as a U/V mixer. When connecting both 75-ohm VHF and 300-ohm UHF antennas, or 300-ohm UHF antenna only; Antenna Connector Should be Horizontal To turn the slot, use a coin or a similar object. 21