Sony LBT-GTZ4i Operating Instructions - Page 23

Basic Operations 4 Press REC to USB . "SYNC" lights up and "REC" flashes in the display. "PUSH ENTER" appears in the display. 5 Press ENTER. Transferring starts when "DON'T REMOVE" appears in the display. When the transferring is completed, both USB device stop automatically. Transferring a single audio file during playback from an USB device to another USB device (USB-USB REC1 Transferring) You can easily transfer the audio file on an USB device that is currently being played back onto another USB device. 1 Connect a transferable USB device to the B port on the unit. 2 Press USB (Press USB (RM-AMU053) or press FUNCTION +/- (RM-AMU054) repeatedly on the remote), then connect the USB device you want to transfer to the A port. 3 Select the audio file you want to transfer, then start play. 4 Press REC TO USB while the selected audio file is being played back. "REC" flashes in the display. "PUSH ENTER" appears in the display. 5 Press ENTER. Transferring starts from the beginning of the file when "DON'T REMOVE" appears in the display. When the transferring is completed, the audio file continues to play. Note (MHC-GTZ4i / GTZ3i / GTZ2i and LBT-GTZ4i only) You cannot transfer the audio files from the iPod which is connected to the A port. To select the playback source or transferring destination on the Sony Ericsson mobile phone (W302, W595, W760i, W890i, W902, W910i only) When listening to music from a Sony Ericsson mobile phone or when transferring music from this system to the mobile phone, you can select the playback source or transferring destination as follows: - internal memory of the mobile phone. - Memory Stick 1 Connect the mobile phone to the B port on the unit and press USB B. 2 Press OPTIONS on the unit in stop mode. 3 Turn OPERATION DIAL to select "USB MEM SEL". 4 Press ENTER. The memory number of the mobile phone appears in the display but varies depending on the specification of the mobile phone. Continued l 23GB