Sony MDS-JB940 Operating Instructions - Page 12
Setting the clock, For details, see Using the CONTROL A1
View all Sony MDS-JB940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started Other connections To connect a CONTROL A1ΙΙ compatible component D Monaural (2P) mini-plug cables (2) (not supplied) For details, see "Using the CONTROL A1ΙΙ control system" on page 44. To connect the AC power cord Connect the AC power cord of the deck to a wall outlet. Note If you use a timer, connect the AC power cord to the outlet of the timer. Demonstration mode When you turn on the MD deck and there is no MD in the deck, demonstration mode is activated automatically after about ten minutes. To deactivate the demonstration mode, press any button on the deck or on the remote. z To turn off the demonstration mode Press x and CLEAR simultaneously when there is no MD in the deck. "Demo Off" appears in the display. To turn on the demonstration mode again, perform the same procedure described above. "Demo On" appears in the display. Setting the clock Once you set the MD deck's internal clock, the MD deck will automatically record the date and time of all recordings. For USA and Canadian models, date is displayed in the order of month, day, year, and time on a 12-hour clock. For European model, date is displayed in the order of day, month, year, and time on a 24-hour clock. Note The display windows below are of USA and Canadian models. MENU/NO YES m/M AMS 1 While the deck is stopped, press MENU/NO twice. "Setup Menu" appears in the display. 2 Turn AMS (or press ./> repeatedly) until "Clock Set ?" appears, then press AMS. The month (or day) indication starts flashing. 3 Turn AMS (or press ./> repeatedly) to enter the current day, then press AMS. The month (or day) indication stops flashing, and the day (or month) indication starts flashing. 4 Repeat step 3 to enter the month, day, year, hour, and minute. 12 GB Hooking up the audio components/Setting the clock Complete!! Changing the clock setting(s) 1 Do steps 1 and 2 above. 2 Press AMS or m/M repeatedly until the setting you want to change flashes.