Sony MDS-JB940 Operating Instructions - Page 53
Self-diagnosis function, the display. If the code and message alternate, find them - software
View all Sony MDS-JB940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Self-diagnosis function The deck's self-diagnosis function automatically checks the condition of the MD deck when an error occurs, then issues a three- or five-digit code and an error message on the display. If the code and message alternate, find them in the following table and perform the indicated countermeasure. Should the problem persist, consult your nearest Sony dealer. Three- or fivedigit code/ Message Cause/Remedy C11/Protected The inserted MD is record-protected. , Take out the MD and close the record- protect slot (page 15). C12/Cannot Copy You tried to record a CD with a format that the external device connected to the deck does not support, such as CD-ROM or video CD. , Remove the disc and insert a music CD. The recording was not made properly. , Set the deck in a stable surface, and repeat the recording procedure. C13/REC Error The inserted MD is dirty (with smudges, fingerprints, etc.), scratched, or substandard in quality. , Replace the disc and repeat the recording procedure. C13/Read Error C14/Toc Error The deck could not read the TOC on the MD properly. , Take out the MD and insert it again. The deck could not read the TOC on the MD properly. , Insert another disc. , If possible, erase all the tracks on the MD (page 32). C41/Cannot Copy The sound source is a copy of commercially available music software, or you tried to record a CD-R (Recordable CD). , The Serial Copy Management System prevents making a digital copy (page 52). You cannot record a CD-R. Three- or fivedigit code/ Message C71/Din Unlock E0001/ MEMORY NG E0101/ LASER NG Cause/Remedy The sporadic appearance of this message is caused by the digital signal being recorded. This will not affect the recording. While recording from a digital component connected through the DIGITAL IN connector, the digital connecting cable was unplugged or the digital component turned off. , Connect the cable or turn the digital component back on. There is an error in the internal data that the deck needs in order to operate. , Consult your nearest Sony dealer. There is a problem with the optical pickup. , The optical pickup may have failed. Consult your nearest Sony dealer. Additional Information 53 Self-diagnosis function GB