Sony MDS-JB940 Operating Instructions - Page 14
Recording to MDs, Recording to an MD
View all Sony MDS-JB940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Recording to MDs This chapter explains the various ways to record to an MD, as well as how to mark track numbers and perform synchro-recording with other components. See also "System limitations" on page 51 before recording. 14 GB Recording to an MD Recording to an MD If the MD has been partially recorded, recording starts after the recorded tracks. ?/1 slot INPUT REC z H X AMS 1 Turn on the amplifier and program source, and select the source on the amplifier. 2 Press ?/1 to turn on the deck. The STANDBY indicator turns off. 3 Insert a recordable MD into the slot. 4 Press INPUT repeatedly to select the input jacks (connector) connected to the program source. When the source is connected to the Set INPUT to DIGITAL OPTICAL IN1 connector OPT1 DIGITAL OPTICAL IN2 connector OPT2 DIGITAL COAXIAL IN jack COAX ANALOG IN jacks ANALOG 5 If necessary, locate the point on the MD to start recording from. If you want to record to a new MD or start recording from the end of the recorded portion, skip this step and go to step 6. To record over from the beginning of an existing MD track Turn AMS (or press ./> repeatedly) until the number of the track to be recorded over appears. To record over from the middle of an MD track Turn AMS (or press ./> repeatedly) until the number of the track to be recorded over appears, then press H to start play. Press X at the point you want to start recording from. 6 Press REC z. The deck changes to recording pause. 7 If necessary, adjust the recording level. For details, see "Adjusting the recording level" on page 17. 8 Press H or X. Recording starts. 9 Start playing the program source.