Sony MEX-M72BT Operating Instructions - Page 13
Connecting a USB Device, Connecting Other Portable Audio Device, Listening to the Radio
View all Sony MEX-M72BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting a USB Device 1 Turn down the volume on the unit. 2 Connect the USB device to the unit. To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied). Connecting Other Portable Audio Device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect the portable audio device to the AUX input jack (stereo mini jack) on the unit with a connecting cord (not supplied)*. * Be sure to use a straight type plug. 4 Press SRC to select [AUX]. To match the volume level of the connected device to other sources Start playback of the portable audio device at a moderate volume, and set your usual listening volume on the unit. Press MENU, then select [SOUND] [SET AUX VOL] (page 24). Listening to the Radio Listening to the Radio Tuning step setting is required (page 10). To listen to the radio, press SRC to select [TUNER]. Storing automatically (BTM) 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Press MENU, rotate the control dial to select [GENERAL], then press it. 3 Rotate the control dial to select [SET BTM], then press it. The unit stores stations in order of frequency on the number buttons. Tuning 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Perform tuning. To tune manually Press and hold / (SEEK -/+) to locate the approximate frequency, then press / (SEEK -/+) repeatedly to finely adjust to the desired frequency. To tune automatically Press / (SEEK -/+). Scanning stops when the unit receives a station. Storing manually 1 While receiving the station that you want to store, press and hold a number button (1 to 6) until [MEM] appears. Receiving the stored stations 1 Select the band, then press a number button (1 to 6). 13GB