Sony MEX-M72BT Operating Instructions - Page 15
Selecting channels for SiriusXM, To select channels from categories
View all Sony MEX-M72BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Notes • The activation process usually takes 10 to 15 minutes, but may take up to an hour. • Your radio will need to be turned on and receiving the SiriusXM signal to receive the activation message. Selecting channels for SiriusXM 1 Press (browse). 2 Rotate the control dial to select [CHANNEL], then press it. 3 Rotate the control dial to select the desired channel, then press it. To select channels with rapid browse mode Press and hold or of remote commander more than 2 seconds after [CHANNEL] selected, then press ENTER. To select channels from categories 1 Press (browse). 2 Rotate the control dial to select [CATEGORY], then press it. 3 Rotate the control dial to select the desired category, then press it. The channel list appears. 4 Rotate the control dial to select the desired channel, then press it. To store channels 1 While receiving the channel that you want to store, press and hold a number button (1 to 6) until [MEM] appears. To receive the stored channel, press MODE to select the Band you want ([SX1], [SX2] or [SX3]), then press a number button (1 to 6). (Each Band can store up to 6 channels.) To set a parental control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels. Information on setting up the passcode and locking channels can be found below. 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [SXM PARENTAL] [LOCK SELECT] [LOCK-ON]. 3 Enter the passcode by rotating the control dial on the unit or pressing / on the remote commander. To move the entry position, press / (SEEK -/+) on the unit or / on the remote commander. The initial passcode is [0000]. 4 After entering the passcode, press ENTER. To unlock the channels, select [LOCK-OFF]. To change the passcode 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [SXM PARENTAL] [CODE EDIT]. 3 Enter the current passcode on the current passcode input display, then press ENTER. The initial passcode is [0000]. 4 Enter your new 4-digit passcode on the new passcode input display, then press ENTER. To change display items Press DSPL to change as follows: Channel Number (Default) Channel Name Artist Name Song Title Content Info Category Name Clock Battery Voltage 15GB