Sony MHC-DP700 Operating Instructions - Page 11
Setting the time, Saving the power in standby mode, Power Saving
View all Sony MHC-DP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started Setting the time 1 Turn on the system. 2 Press CLOCK/TIMER SET. When you set the time for the first time, proceed to step 5. 3 Press . or > repeatedly to select "CLOCK SET". 4 Press ENTER. 5 Press . or > repeatedly to set the hour. 6 Press ENTER. 7 Press . or > repeatedly to set the minutes. 8 Press ENTER. Tips • If you have made a mistake or want to change the time, start over from step 2. • You can use the digipad instead of ./>. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Saving the power in standby mode Note During the Power Saving Mode, the following functions do not work: - Setting the time. - Changing the AM tuning interval (except for European and Middle Eastern models). - Pressing a function button to turn the power on. - Switching the function of MD (VIDEO). Press DISPLAY repeatedly when the power is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock t Power Saving Mode To cancel the Power Saving Mode Press DISPLAY once to show the demonstration, twice to show the clock display. Tips • ?/1 indicator lights up even in the Power Saving Mode. • The timer functions during the Power Saving Mode. 11