Sony MHC-DP700 Operating Instructions - Page 13

CD To Play repeatedly (Repeat Play) Do this Press REPEAT during playback until "REPEAT" or "REPEAT 1" appears. REPEAT*: For all the tracks on the CD up to 5 times. REPEAT 1: For a single track only. To cancel Repeat Play, press REPEAT until "REPEAT" and "REPEAT 1" disappears. * You cannot use this function during ALL DISCS SHUFFLE. Tips • You can use the digipad for CD operations. • Pressing CD while the power is off automatically turns the power on. Programming the CD tracks -- Program Play You can make a program of up to 25 tracks from all the CDs in the order you want them to be played. 1 Press CD. 2 Press PLAY MODE repeatedly until "PROGRAM" appears in the display. 3 Press DISC 1-3 to select a CD. To program all the tracks on a CD at once, proceed to step 5 while "AL" appears in the display. 4 Press . or > repeatedly until the track you want appears in the display. Total playing time Disc tray number Track number (including selected track) PROGRAM 5 Press ENTER. The track(s) is (are) programmed. The program step number appears, followed by the total playing time. 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 to select tracks from the same disc. 7 Press nN. To Press Cancel Program Play PLAY MODE repeatedly until "1 DISC" or "ALL DISCS" appears in the display. Clear a track from CLEAR on the remote when the end playback is stopped. Add a track to the program when playback is stopped 1 Press DISC 1-3 to select a CD. 2 Press . or > repeatedly to select the track. 3 Press ENTER. Tips • The program you made remains in the system's memory even after it has been played back. Press nN to play the same program again. • If "--.--" appears instead of the total playing time during programming, this means: - you have programmed a track number which exceeds 20. - the total playing time has exceeded 100 minutes. MUSIC 1 2 3 MOVIE A B GAME TOOL 13