Sony MHC-GX450 MHCGX450 Instructions (tuner portion of Stereo System) - Page 14

Creating your own program - Program Play You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 19). MP3 audio tracks cannot be played on MHC-GX250, MHC-RG121 and MHC-RG100. 1 Press CD (or FUNCTION repeatedly) to switch the function to CD. 2 Press PLAY MODE repeatedly in stop mode until "PGM" appears. 3 Press DISC SKIP (or DISC 1 - 3 or DISC SKIP/EX-CHANGE on the unit) to select a disc. 4 Press . or > repeatedly (or turn l L on the unit) until the desired track number appears. When programming the MP3 audio tracks, press ALBUM - or + to select album, then press . or > repeatedly (or turn l L on the unit) until the desired track number appears. Disc tray number Selected track number 6 Program additional tracks. To program Repeat steps Other tracks on the 4 and 5 same disc Other tracks on other discs 3 to 5 7 Press N. Program Play starts. Other operations To Cancel Program Play Clear a track from the end Do this Press PLAY MODE repeatedly in stop mode until "PGM" disappears. Press CLEAR in stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press CD (or FUNCTION repeatedly) to switch the function to CD, then press N. However, the program is cleared when you open the disc tray. appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track. Total playing time (including selected track) 5 Press ENTER. The track is programmed. The program step number appears, followed by the total playing time. 14GB